Description
General
Total output: 3850 lumens (zoom at maximum)
Dynamic Effects
Beam color mixing: RGBW
Aura (secondary lens array illumination) color mixing: RGB
Beam color temperature control: CTO, variable 10 000 – 2500 K
Beam and aura electronic ‘color wheel’ effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color
Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects
Pre-programmed effects: Range of synchronized and independent beam and aura FX, different FX can be combined
Electronic dimming: Independent beam and aura, four dimming curve options
Zoom: 11° – 58° (one-tenth peak angle)
Pan: 540°
Tilt: 232°
Pan and tilt speed: Adjustable via onboard control panel and DMX
Optics
Light source: Osram Ostar high-power emitters
LED refresh rate: Beam 1220 Hz, aura 4395 Hz
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
*Manufacturer´s figure obtained under manufacturer´s test conditions
Control and Programming
Control options: Independent control of beam (primary output) and aura (secondary lens array illumination)
Macro programs selectable via DMX: Synchronized beam and aura effects
Control: DMX
RDM: Implemented
Control resolution: 8-bit, with 16-bit control of pan & tilt
DMX channels: 14/25
Setting and addressing: Control panel with backlit graphic display
Protocol: USITT DMX512-A, ANSI/ESTA E1.20 RDM
Transceiver: RS-485
Fixture software update: Via DMX with Martin USB Duo DMX Interface
Connections
AC power input: Neutrik PowerCon
AC power throughput: Neutrik PowerCon
DMX and RDM data in/out: 5-pin locking XLR
Power
Requirement: 100-240 VAC nominal, 50/60 Hz
Consumption
Maximum: 260 W
All effects static, zero light output: <15 W typical
Power supply unit: Auto-ranging electronic switch mode
Main fuse: 5 AT (slow blow)
Typical Power and Current
100 V, 60 Hz: 236 W, 2.4 A, PF 0.994
120 V, 60 Hz: 234 W, 2.0 A, PF 0.992
208 V, 60 Hz: 229 W, 1.2 A, PF 0.970
230 V, 50 Hz: 228 W, 1.1 A, PF 0.959
240 V, 50 Hz: 228 W, 1.0 A, PF 0.953
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Physical
Dimensions: 11.9″L x 11.9″W x 14.2″H with head straight up (302 x 302 x 360mm)
Weight: 12.3 lbs (5.6 kg) without accessories
Construction
Color: Black
Housing: High-impact flame-retardant thermoplastic
Protection rating: IP20
Installation
Mounting points: One M12 threaded hole for rigging clamp
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any
Minimum distance to combustible materials: 100 mm (3.9 in.)
Minimum distance to illuminated surfaces: 200 mm (7.9 in.)
Environmental
Maximum ambient temperature (Ta max.): 104°F (40°C)
Minimum ambient temperature (Ta min.): 41°F (5°C)
Total heat dissipation (calculated, +/- 10%): 880 BTU/hr.
Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
Certifications
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class A
Canadian safety: CSA E598-2-17 (CSA E60598-1)
Canadian EMC: ICES-003 Class A
Australia/NZ: C-TICK N4241
