Description
Dynamic Effects
Color mixing: RGBAW
Red: 0 – 100%
Green: 0 – 100%
Blue: 0 – 100%
Amber: 0 – 100%
White: 0 – 100%
Control and Programming
Color control modes: RGBAW, RGB, HSI, HSIC
DMX channels: 3 – 30
Grouped pixel control options: 6 x 1 (individual), 3 x 2, 2 x 3 or 1 x 6 (all as one group) pixels
DMX address setting: Manual, auto addressing and auto address copy
Fixture setup: Onboard control panel with display
Display: Battery-powered backlit LCD, 2 x 16 characters
16-bit control (internal): RGBAW, RGB, HSI, HSIC
Protocol: USITT DMX512-A
Receiver: RS-485
Firmware update: Serial upload via DMX link
Photometric Data
Light source: Luxeon K2 high power emitters
LED power per pixel: 2 x 1.2 W red, 2 x 2.9 W green, 2 x 2.9 W royal blue, 2 x 1.2 W amber, 1 x 2.9 W white
Total LED power per bar: 116 W
Even pitch across adjacent fixtures: Horizontal/vertical (Stagebar 54L), horizontal (Stagebar 54S)
Total output (max.): 1900 lm
Construction
Color: Black
Housing: Steel and aluminum
Finish: Electrostatic powder-coated
Protection rating: IP20
Installation
Mounting points: Adjustable mounting bracket, 1/4-turn locks, four M6 threaded holes
Orientation: Any
Connections
Power in/out: Neutrik Powercon
Data in/out: RJ-45
Electrical
AC power: 100-240 V nominal, 50/60 Hz
Power supply unit: Integrated, auto-sensing multi-voltage
Power output fuse: 15 AT (slow blow)
Main fuse: 4 AT (slow blow)
Thermal
Cooling: Filtered forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 104° F
Minimum ambient temperature (Ta min.): 41° F
Maximum surface temperature, steady state, Ta=104°F: 167° F
Total heat dissipation (calculated, +/- 10%): 860 BTU/hr.
Acoustic
Noise level: <40 dBA at 3.3 ft., steady state, Ta 77° F
Licensing
Available under license from Color Kinetics Incorporated
Approvals
EU safety: EN 60598-1, EN 60598-2-17, IEC/EN 60825-1
EU EMC: EN 55 015, EN 55 103-1, EN 55 103-2
US safety: ANSI/UL 1573
Canadian safety: CAN/CSA E 60598-2-17